|
GEL
FUEL TERRA TORCH MODEL 1400
Specifications
& Features
Size: 40" Wide, 77" Long, 51" High
Construction:
 |
Aluminum engine/pump
compartment with expanded aluminum screens.
|
|
140 gallon DOT 406
Stainless Steel Tank. Internal
shutoff valves with remote controls, lifting lugs, vapor
recovery fitting and bottom fill.
|
Mechanical
Components:
|
13 hp Briggs & Stratton
Vanguard electric start engine with spark arrestor.
|
|
22 GPM brass body
positive displacement pump with brass gears and stainless steel shaft.
Maximum pressure 300 PSI
|
|
Reduction Drive unit to
pump.
|
|
Electromagnetic clutch
for instant on and off, or continuous use.
|
|
Relief Valve and
Pressure Gauge
|
|
12 volt Battery and
Battery Box
|
Gun
Components:
|
Single Trigger with a
grounded circuit for safer and easier operation.
|
|
Brass barrel with
shutoff at tip
|
|
Adjustable handle.
|
|
Variable protractor
type adjustment on gel fuel ignition device for different firing conditions.
|
|
25ft of 500 PSI
electrically non-conductive ¾” hose.
|
Features:
|
Since
sight tubes do not work well with gel, our units have a fuel level gauge
inside the tank and it comes with a 10” Lexan clear sealed window that
slides into the 10” manway. This
allows for safe visual observation of fuel level and gel mixing.
|
|
Gel
mixing is done by recirculation. Mixing
times will vary from 5 to 20 minutes depending on type of fuel used.
The most efficient operation is achieved by using a thick gel mix.
The unit is capable of operating with 150 feet of hose.
Maximum shooting distance is 150 feet.
|
|
Unit
can be ordered with a larger pump and plumbing if its primary purpose is
batch mixing. Larger pump is model 1400-50.
|
|
