Home Product Line Contact Us Search

 

2400 BATCH MIXER SYSTEM & OPTIONS
Specifications & Features

Power Unit:

Engine/pump Compartment is constructed of aluminum with a control panel and    expanded aluminum screens.

13 hp Briggs & Stratton Vanguard electric start engine with spark arrestor

50 GPM Pump

Reduction drive unit to pump.

Electromagnetic Clutch for instant on and off.

Pressure relief valve. 

Glycerin filled pressure gauge.

12-volt battery & battery box (outside mount)

240-Gallon or Larger D.O.T Tank:

DOT 406 Tank mounted on Skids.

Construction of tank is entirely 12 gauge T-304 Stainless Steel

10” DOT Manway

Two 2” Internal Shutoff Valves with Remote Controls

Tank can be filled from fuel truck or by drafting.  Comes with a 2” Civacon dry break
adapter & 2” camlock on top with tube plumbed to bottom of tank.

Inside tank has recirculation tube for ultimate swirl action.

Lifting Lugs

Fuel Level Gauge and Removable 10” Sight Window

Top of tank has Vapor Recovery fittings

Trailer Option:

6ft x 12ft Tandem Axle – each axle 3500#

Four wheel electric brakes.

Expanded Steel Floor

Spare Tire & Wheel

Terra Torch Gun & Hose Option:

Single Trigger  with a grounded circuit for safer & easier operation.

Brass barrel with shutoff at tip for minimum drip.

Adjustable Handle

Variable protractor type adjustment on gel fuel ignition device for different
Orifice size is variable i.e. from 1/8” to 5/16”

25 foot 500 PSI electrically non-conductive ¾” hose.

Features:         

Basic 2400 System - Includes Power Unit, 240 gallon DOT Tank and 100ft 2” Flexible Fuel Fill Hose with Emco Wheaton Coupler.  Options include Trailer, Manual or Electric Reel and Terra Torch Gun/Hose.

There are three ways to fill the tank.  On the bottom is a Civacon Dry Break adapter.  This is a camlock type of dry break used by fuel trucks.  The fuel may be pumped in by a fuel truck.  If you do not have a way of pumping in the fuel, the same connection can be made and by using the batch mixer pump, the fuel can be drafted in.  There is also a 2” Camlock on top of the tank with a vented tube running to the bottom of the tank.  This would allow for filling at a gas station or from your yard pumps.

Since sight tubes do not work well with gel, our units have a fuel level gauge inside the tank and it comes with a 10” Lexan clear sealed window that slides into the 10”   manway.  This allows for safe visual observation of fuel level and gel mixing.

Gel mixing is done by recirculation.  Mixing times will vary from 5 to 20 minutes depending on type of fuel used.  The inside of the tank has a tube running the full length with several outlets.  This provides a maximum swirling action.

System is plumbed and wired to be used as a Terra Torch.  The wand and hose may be purchased with 2400 System, or added later.  The most efficient terra torch operation is achieved by using a thick gel mix.  It is capable of operating with 150 feet of hose.  Maximum shooting distance is 150 feet.


Back Home Up Next